PartsTable
Technical Data Sheet
Download PDF

5265747 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5265747: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, knuckle_type: FRICTION, pin_diameter: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN, overall_length: 19.000 INCHES NOMINAL IN, knuckle_quantity: 135, performance_type: NOT RATED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-399-7088, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5265747
NSN: 5340-01-399-7088
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
knuckle_typeFRICTION
pin_diameter0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
overall_length19.000 INCHES NOMINAL IN
knuckle_quantity135
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
style_designatorBUTT
material_thickness0.060 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
pin_center_to_body_edge_distance0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
material_document_and_classificationUNABLE TO DECODE
NSN5340-01-399-7088
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5265747 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
STYLE DESIGNATOR: BUTT
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
PIN CENTER TO BODY EDGE DISTANCE: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
PIN REMOVABILITY: NONREMOVABLE
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
REVERSIBLE FEATURENOT INCLUDED
STYLE DESIGNATORBUTT
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL LENGTH19.000 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
KNUCKLE QUANTITY135
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5265747?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5265747?
5265747 is a HINGE,BUTT.
What is the NSN for 5265747?
5265747 is cataloged in the U.S. Government catalog under NSN 5340-01-399-7088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5265747