PartsTable
Technical Data Sheet
Download PDF

5262737 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5262737: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.510 INCHES MINIMUM AND 7.550 INCHES MAXIMUM IN, aperture_width: 6.010 INCHES MINIMUM AND 6.050 INCHES MAXIMUM IN, overall_length: 7.810 INCHES MINIMUM AND 7.850 INCHES MAXIMUM IN, aperture_length: 6.310 INCHES MINIMUM AND 6.350 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-187-7622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5262737
NSN: 5330-01-187-7622
FSC: 5330 — Packing and Gasket Materials
CAGE: 15090 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
hole_diameter0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.510 INCHES MINIMUM AND 7.550 INCHES MAXIMUM IN
aperture_width6.010 INCHES MINIMUM AND 6.050 INCHES MAXIMUM IN
overall_length7.810 INCHES MINIMUM AND 7.850 INCHES MAXIMUM IN
aperture_length6.310 INCHES MINIMUM AND 6.350 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
bolt_hole_quantity7
inside_corner_radius0.130 INCHES MAXIMUM IN
cross-sectional_thickness0.090 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width0.380 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.380 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width3.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-187-7622
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5262737 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.090 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.130 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE WIDTH: 6.010 INCHES MINIMUM AND 6.050 INCHES MAXIMUM IN
•
APERTURE LENGTH: 6.310 INCHES MINIMUM AND 6.350 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 7
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.090 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.130 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH7.810 INCHES MINIMUM AND 7.850 INCHES MAXIMUM IN
OVERALL WIDTH7.510 INCHES MINIMUM AND 7.550 INCHES MAXIMUM IN
APERTURE WIDTH6.010 INCHES MINIMUM AND 6.050 INCHES MAXIMUM IN
APERTURE LENGTH6.310 INCHES MINIMUM AND 6.350 INCHES MAXIMUM IN
BOLT HOLE QUANTITY7
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.400 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5262737?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5262737?
5262737 is a GASKET.
What is the NSN for 5262737?
5262737 is cataloged in the U.S. Government catalog under NSN 5330-01-187-7622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5262737

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.