PartsTable
Technical Data Sheet
Download PDF

526-A-450 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

526-A-450: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: COPPER ALLOY OVERALL, seat_angle: 37.0 DEGREES FIRST END, bonnet_type: INSIDE SPRING, thread_class: 3A FIRST END A, connection_style: PLAIN (PIPE) SECOND END, style_designator: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 4820-00-116-3911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
526-A-450
NSN: 4820-00-116-3911
FSC: 4820 — Valves, Nonpowered
CAGE: 28193 — HENRY TECHNOLOGIES, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
seat_angle37.0 DEGREES FIRST END
bonnet_typeINSIDE SPRING
thread_class3A FIRST END A
connection_stylePLAIN (PIPE) SECOND END
style_designatorANGLE
thread_directionRIGHT-HAND ALL ENDS
features_providedPRESSURE TIGHT OUTLET SIDE
operating_pressure450.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
disk_loading_methodSPRING
flow_control_devicePOPPET
nominal_thread_size0.250 INCHES SECOND END IN
NSN4820-00-116-3911
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 526-A-450 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: POPPET
•
CONNECTION STYLE: FLARED (TUBE) FIRST END
•
STYLE DESIGNATOR: ANGLE
•
OPERATING PRESSURE: 450.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
FEATURES PROVIDED: PRESSURE TIGHT OUTLET SIDE
•
BONNET TYPE: INSIDE SPRING
•
THREAD DIRECTION: RIGHT-HAND ALL ENDS
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEPOPPET
CONNECTION STYLEFLARED (TUBE) FIRST END
CONNECTION STYLEPLAIN (PIPE) SECOND END
STYLE DESIGNATORANGLE
OPERATING PRESSURE450.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
FEATURES PROVIDEDPRESSURE TIGHT OUTLET SIDE
BONNET TYPEINSIDE SPRING
THREAD DIRECTIONRIGHT-HAND ALL ENDS
NOMINAL THREAD SIZE0.562 INCHES FIRST END IN
NOMINAL THREAD SIZE0.250 INCHES SECOND END IN
SUBSTITUTES & CROSS-REFERENCES 3
D20793Reference document
Same NSN cross-reference
Reference document — Secondary reference
67A81A79Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
526AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 526-A-450?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 526-A-450?
526-A-450 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 526-A-450?
There are 3 known substitutes for 526-A-450: D20793, 67A81A79, 526A. Substitute compatibility should be verified for your specific system.
What is the NSN for 526-A-450?
526-A-450 is cataloged in the U.S. Government catalog under NSN 4820-00-116-3911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 526-A-450