PartsTable / COMPONENT / 525324
525324
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, housing_bore_diameter: 5.251 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 3.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2230, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
525324
NSN: 5330-00-641-2230 FSC: 5330 CAGE: 62137 — UNIVERSAL ENGINEERING CORP. (USA)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN housing_bore_diameter 5.251 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 3.750 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-641-2230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 525324
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
• SEALING ELEMENT STYLE: ANGULAR
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 3.750 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• HOUSING BORE DIAMETER: 5.251 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN SEALING ELEMENT STYLE ANGULAR MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 3.750 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT HOUSING BORE DIAMETER 5.251 INCHES NOMINAL IN CASE STYLE SQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
55031 Interchangeable interchangeable cross-reference
interchangeable
07-244 Interchangeable interchangeable cross-reference
interchangeable
120260H1 Interchangeable interchangeable cross-reference
interchangeable
FMF00264 Interchangeable interchangeable cross-reference
interchangeable
930004207 Interchangeable interchangeable cross-reference
interchangeable
DM10 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 525324?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 525324?
525324 is a SEAL,PLAIN ENCASED.
What parts can replace 525324?
There are 23 known substitutes for 525324: 55031, 07-244, 120260H1 and 20 more. Substitute compatibility should be verified for your specific system.
Is 525324 still available?
525324 is currently cancelled.