PartsTable
Technical Data Sheet
Download PDF

525-575-9002 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

525-575-9002: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, nut_style: ROUND, nut_diameter: 0.812 INCHES NOMINAL IN, nut_thickness: 0.188 INCHES NOMINAL IN, thread_series: UNS, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-883-9260, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
525-575-9002
NSN: 5310-00-883-9260
FSC: 5310 — Nuts and Washers
CAGE: 59364 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - TEMPE (WEST WARNER ROAD) (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
nut_styleROUND
nut_diameter0.812 INCHES NOMINAL IN
nut_thickness0.188 INCHES NOMINAL IN
thread_seriesUNS
thread_directionRIGHT-HAND
drive_point_depth0.063 INCHES NOMINAL IN
drive_point_width0.125 INCHES NOMINAL IN
nominal_thread_size0.469 INCHES IN
drive_point_quantity8
thread_pitch_diameters+0.4487 TO 0.4513 INCHES IN
thread_quantity_per_inch32
NSN5310-00-883-9260
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 525-575-9002 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNS
•
THREAD PITCH DIAMETERS: +0.4487 TO 0.4513 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT WIDTH: 0.125 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.469 INCHES IN
•
NUT DIAMETER: 0.812 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNS
THREAD PITCH DIAMETERS+0.4487 TO 0.4513 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT WIDTH0.125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.469 INCHES IN
NUT DIAMETER0.812 INCHES NOMINAL IN
DRIVE POINT DEPTH0.063 INCHES NOMINAL IN
NUT THICKNESS0.188 INCHES NOMINAL IN
DRIVE POINT QUANTITY8
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
GA172237Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 525-575-9002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 525-575-9002?
525-575-9002 is a NUT,PLAIN,ROUND.
What parts can replace 525-575-9002?
There is 1 known substitute for 525-575-9002: GA172237. Substitute compatibility should be verified for your specific system.
What is the NSN for 525-575-9002?
525-575-9002 is cataloged in the U.S. Government catalog under NSN 5310-00-883-9260. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 525-575-9002

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.