PartsTable
Technical Data Sheet
Download PDF

52432 — LEVER,MANUAL CONTROL

✓ Government record, cited
Clementoni · ORING SEAL
PRODUCT OVERVIEW

52432: LEVER,MANUAL CONTROL.

The Viewmate SFF holder adds functionality to monitor arms, workstations and toolbars. It's mounted on any pole in the Viewmate range and has clamp-lever height adjustment, so your SFF computer is always within reach. - Suitable for all Viewmate monitor arms, workstations and toolbars - Easy to adjust in height using a clamp lever - Snugly fixes an SFF in place using a belt and strap - Max.

weight capacity of 10 kg - Fits devices with a thickness of 65 - 111 mm and max. height of 350 mm - Clamps an SFF with a non-slip foam surface for snug mounting This part is cataloged in the U.S. Government catalog under NSN 5340-00-103-9129, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
52432
NSN: 5340-00-103-9129
NIINs: 001039129, 003927776, 004336888, 011588010, 012330077, 013480425, 015759322
FSC: 5340 — Hardware, Commercial
CAGE: 81381 — STEWART & STEVENSON POWER PRODUCTS LLC (USA)
SPECIFICATIONS
width7.875 INCHES NOMINAL IN
length9.062 INCHES NOMINAL IN
materialPLASTIC OVERALL EXCEPT INSULATION
body_width0.820 INCHES NOMINAL IN
body_height0.730 INCHES NOMINAL IN
body_length0.820 INCHES NOMINAL IN
overall_width0.375 INCHES IN
body_thickness0.438 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_length1.710 INCHES NOMINAL IN
mounting_methodTERMINAL SINGLE GROUP
size_designator2.5 MM SIZE DESINATOR MM
NSN5340-00-103-9129
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 52432 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 9.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT W/OPEN CENTER
•
FEATURES PROVIDED: HANDLE FOR OPENING, LIFTING, CLOSING, OR THE LIKE
•
SECURING DEVICE TYPE: HINGE AND SPRING CLIP
•
PERIPHERAL SHAPE STYLE: RECTANGLE, NO HOLES
•
WIDTH: 7.875 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
BODY THICKNESS: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH9.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT W/OPEN CENTER
FEATURES PROVIDEDHANDLE FOR OPENING, LIFTING, CLOSING, OR THE LIKE
SECURING DEVICE TYPEHINGE AND SPRING CLIP
PERIPHERAL SHAPE STYLERECTANGLE, NO HOLES
WIDTH7.875 INCHES NOMINAL IN
MATERIALSTEEL
BODY THICKNESS0.438 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
Manufacturer release date (catalog record)2020-02-15
No demilitarization required
Ready to buy 52432?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52432?
52432 is a LEVER,MANUAL CONTROL manufactured by Clementoni.
What is the NSN for 52432?
52432 is cataloged in the U.S. Government catalog under NSN 5340-00-103-9129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52432

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.