PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 52375
52375 ✓ Verified by PartsTable
Clementoni · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: ALUMINUM ALLOY SEDIMENT BOWL, body_width: 1.375 INCHES NOMINAL IN, cone_width: 1.4219 INCHES NOMINAL IN, body_height: 1.375 INCHES NOMINAL IN, body_length: 3.031 INCHES NOMINAL IN, design_type: REUSABLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3618, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
52375
NSN: 3110-00-100-3618
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY SEDIMENT BOWL
body_width1.375 INCHES NOMINAL IN
cone_width1.4219 INCHES NOMINAL IN
body_height1.375 INCHES NOMINAL IN
body_length3.031 INCHES NOMINAL IN
design_typeREUSABLE
bore_diameter3.7500 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
fsc_application_dataHYDRAULIC SYSTEM AIRCRAFT
filtering_media_designSPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE
NSN3110-00-100-3618
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 52375 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
BORE DIAMETER: 3.7500 INCHES NOMINAL IN
•
CONE WIDTH: 1.4219 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
BORE DIAMETER3.7500 INCHES NOMINAL IN
CONE WIDTH1.4219 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
52375Interchangeable
interchangeable cross-reference
interchangeable
TYPEG187M34Interchangeable
interchangeable cross-reference
interchangeable
10504406Interchangeable
interchangeable cross-reference
interchangeable
PL-52699 PIECE 12Interchangeable
interchangeable cross-reference
interchangeable
50000Interchangeable
interchangeable cross-reference
interchangeable
187286Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 52375?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52375?
52375 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Clementoni.
What parts can replace 52375?
There are 10 known substitutes for 52375: 52375, TYPEG187M34, 10504406 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 52375?
52375 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3618. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52375

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026