PartsTable
Technical Data Sheet
PartsTable / O-RING / 52371-8
52371-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The IMPELLER,PUMP,CENTRIFUGAL is a the manufacturer industrial component. Key specifications include end_item_identification: PUMP,CENTRIFUGAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1955, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
52371-8
NSN: 5331-00-165-1955
FSC: 5331 — O-RING
CAGE: 59165 — NORMAN FILTER COMPANY, L.L.C. DBA NORMAN FILTER CO LLC (USA)
SPECIFICATIONS
end_item_identificationPUMP,CENTRIFUGAL
NSN5331-00-165-1955
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 52371-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 3.605 INCHES MINIMUM AND 3.669 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.335 INCHES MINIMUM AND 3.383 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER3.605 INCHES MINIMUM AND 3.669 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.335 INCHES MINIMUM AND 3.383 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
AMS7276Interchangeable
interchangeable cross-reference
interchangeable
AS3209-145Interchangeable
interchangeable cross-reference
interchangeable
2-145V1164-75Interchangeable
interchangeable cross-reference
interchangeable
AS3209-114Interchangeable
interchangeable cross-reference
interchangeable
J221P022Interchangeable
interchangeable cross-reference
interchangeable
S1D10048 ITEM 39Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 52371-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52371-8?
52371-8 is a IMPELLER,PUMP,CENTRIFUGAL.
What parts can replace 52371-8?
There are 32 known substitutes for 52371-8: AMS7276, AS3209-145, 2-145V1164-75 and 29 more. Substitute compatibility should be verified for your specific system.
Is 52371-8 still available?
52371-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52371-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026