PartsTable
Technical Data Sheet
Download PDF

5232301 — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5232301: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, POLYETHYLENE (PP), length_under_shoulder: 0.375 INCHES NOMINAL IN, open_end_inside_diameter: 0.468 INCHES NOMINAL IN, closed_end_overall_diameter: 0.615 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-237-7165, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5232301
NSN: 5340-00-237-7165
FSC: 5340 — Hardware, Commercial
CAGE: 95760 — PROTECTIVE CLOSURES CO INC (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
length_under_shoulder0.375 INCHES NOMINAL IN
open_end_inside_diameter0.468 INCHES NOMINAL IN
closed_end_overall_diameter0.615 INCHES NOMINAL IN
NSN5340-00-237-7165
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5232301 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 0.615 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 0.375 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 0.468 INCHES NOMINAL IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER0.615 INCHES NOMINAL IN
LENGTH UNDER SHOULDER0.375 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER0.468 INCHES NOMINAL IN
MATERIALPLASTIC, POLYETHYLENE (PP)
SUBSTITUTES & CROSS-REFERENCES 1
WW-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5232301?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5232301?
5232301 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 5232301?
There is 1 known substitute for 5232301: WW-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 5232301?
5232301 is cataloged in the U.S. Government catalog under NSN 5340-00-237-7165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5232301