5231-47-2 — SEAL,NONMETALLIC STRIP

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

5231-47-2: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SOLID, aperture_width: 7.969 INCHES NOMINAL IN, aperture_length: 10.781 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, attachment_method: CEMENTED. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-427-2195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5231-47-2

NSN: 5360-00-427-2195
NIINs: 004272195, 005231472
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 81336 — CHIEF OF ENGINEERS DEPT OF ARMY (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC OVERALL
construction	SOLID
aperture_width	7.969 INCHES NOMINAL IN
aperture_length	10.781 INCHES NOMINAL IN
style_designator	NON-CIRCULAR
attachment_method	CEMENTED
fabrication_method	SOLID
inside_corner_radius	0.875 INCHES NOMINAL IN
cross-sectional_width	0.266 INCHES NOMINAL IN
outside_corner_radius	1.140 INCHES NOMINAL IN
cross-sectional_height	0.687 INCHES NOMINAL IN
cross-sectional_shape_style	RECTANGULAR
NSN	5360-00-427-2195

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN

•

LOAD RATING: 67.00 POUNDS MINIMUM AND 83.00 POUNDS MAXIMUM LBS

•

END STYLE: OFFSET HOOK, RIGHT ANGLE BOTH ENDS

•

DESIGN TYPE: CLOSED

•

STYLE DESIGNATOR: DOUBLE CYLINDRICAL

•

OPENING WIDTH: 0.538 INCHES NOMINAL BOTH ENDS IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI/SAE FED STD SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 7.949 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	1.125 INCHES NOMINAL IN
LOAD RATING	67.00 POUNDS MINIMUM AND 83.00 POUNDS MAXIMUM LBS
END STYLE	OFFSET HOOK, RIGHT ANGLE BOTH ENDS
DESIGN TYPE	CLOSED
STYLE DESIGNATOR	DOUBLE CYLINDRICAL
OPENING WIDTH	0.538 INCHES NOMINAL BOTH ENDS IN
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66,AISI/SAE FED STD SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	7.949 INCHES NOMINAL IN
COIL TO HOOK INSIDE LENGTH	1.000 INCHES NOMINAL BOTH ENDS IN
DISTANCE BETWEEN ENDS	1.438 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 8

2258P354Reference document

Same NSN cross-reference

Reference document — Secondary reference

752390Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

314M1Reference document

Same NSN cross-reference

Reference document — Secondary reference

16T1042Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

6192201Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

73164Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 5231-47-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5231-47-2?

5231-47-2 is a SEAL,NONMETALLIC STRIP.

What parts can replace 5231-47-2?

There are 8 known substitutes for 5231-47-2: 2258P354, 752390, 314M1 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 5231-47-2?

5231-47-2 is cataloged in the U.S. Government catalog under NSN 5360-00-427-2195. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5231-47-2 — SEAL,NONMETALLIC STRIP

Request a Quote — 5231-47-2