PartsTable
Technical Data Sheet
Download PDF

522811 — ROTOR,HOIST

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

522811: ROTOR,HOIST.

The ROTOR,HOIST is a the manufacturer industrial component. Key specifications include material: NICKEL OVERALL, head_style: HEXAGON, head_height: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, fastener_length: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-849-8262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
522811
NSN: 5306-00-849-8262
NIINs: 008498262, 011360721
FSC: 5306 — Bolts
CAGE: J1695 — KITO MFG CO. LTD (JPN)
SPECIFICATIONS
materialNICKEL OVERALL
head_styleHEXAGON
head_height0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
thread_class3A A
thread_length0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
fastener_length0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch28
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF)
NSN5306-00-849-8262
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 522811 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5708 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
FASTENER LENGTH0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
THREAD LENGTH0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5708 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 1
5222811Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 522811?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 522811?
522811 is a ROTOR,HOIST.
What parts can replace 522811?
There is 1 known substitute for 522811: 5222811. Substitute compatibility should be verified for your specific system.
What is the NSN for 522811?
522811 is cataloged in the U.S. Government catalog under NSN 5306-00-849-8262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 522811

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.