PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5228-5
5228-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include diameter: 2.750 INCHES NOMINAL IN, material: STEEL FILTERING MEDIUM, thickness: 0.500 INCHES NOMINAL IN, joint_type: SCARF-PERIPHERAL ONE SIDE, design_form: SINGLE ANGLE, design_type: REUSABLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-080-1859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5228-5
NSN: 5330-00-080-1859
FSC: 5330
CAGE: 02121 — GOODRICH AEROSPACE CANADA LTD (CAN)
SPECIFICATIONS
diameter2.750 INCHES NOMINAL IN
materialSTEEL FILTERING MEDIUM
thickness0.500 INCHES NOMINAL IN
joint_typeSCARF-PERIPHERAL ONE SIDE
design_formSINGLE ANGLE
design_typeREUSABLE
swage_depth0.141 INCHES IN
angle_in_deg60.000
mounting_typeUNTHREADED HOLE TOP
unit_quantity2
overall_height0.329 INCHES IN
overall_length0.500 INCHES IN
NSN5330-00-080-1859
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5228-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
JOINT TYPE: SCARF-PERIPHERAL ONE SIDE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
PERIPHERAL DIAMETER: 1.615 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.460 INCHES MINIMUM AND 1.470 INCHES MAXIMUM IN
•
FSC APPLICATION DATA: LANDING GEAR,DRAG STRUT
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
JOINT TYPESCARF-PERIPHERAL ONE SIDE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL DIAMETER1.615 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.460 INCHES MINIMUM AND 1.470 INCHES MAXIMUM IN
FSC APPLICATION DATALANDING GEAR,DRAG STRUT
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
10-305-3Interchangeable
interchangeable cross-reference
interchangeable
160-1797-03-01-00Interchangeable
interchangeable cross-reference
interchangeable
2S6-35CInterchangeable
interchangeable cross-reference
interchangeable
310-160LInterchangeable
interchangeable cross-reference
interchangeable
52285Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5228-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5228-5?
5228-5 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 5228-5?
There are 10 known substitutes for 5228-5: 10-305-3, 160-1797-03-01-00, 2S6-35C and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5228-5?
5228-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-080-1859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5228-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026