PartsTable
Technical Data Sheet
Download PDF

5224279-1 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5224279-1: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130, overall_width: 1.000 INCHES NOMINAL IN, overall_height: 0.450 INCHES NOMINAL IN, overall_length: 5.000 INCHES NOMINAL IN, mounting_hole_diameter: 0.312 INCHES NOMINAL IN, material_document_and_classification: MIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-367-7986, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5224279-1
NSN: 5340-01-367-7986
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 4130
overall_width1.000 INCHES NOMINAL IN
overall_height0.450 INCHES NOMINAL IN
overall_length5.000 INCHES NOMINAL IN
mounting_hole_diameter0.312 INCHES NOMINAL IN
mounting_hole_quantity2
material_document_and_classificationMIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-367-7986
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5224279-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 4130
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT0.450 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.312 INCHES NOMINAL IN
OVERALL LENGTH5.000 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL COMP 4130
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5224279-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5224279-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5224279-1?
5224279-1 is a BRACKET,MOUNTING.
What parts can replace 5224279-1?
There is 1 known substitute for 5224279-1: 5224279-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 5224279-1?
5224279-1 is cataloged in the U.S. Government catalog under NSN 5340-01-367-7986. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5224279-1