PartsTable
Technical Data Sheet
Download PDF

5224119-1 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5224119-1: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.800 INCHES NOMINAL IN, height: 0.625 INCHES NOMINAL IN, length: 2.000 INCHES NOMINAL IN, material: STEEL COMP 303, hole_diameter: 0.322 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN, effective_height: 0.445 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-381-9906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5224119-1
NSN: 5340-01-381-9906
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width0.800 INCHES NOMINAL IN
height0.625 INCHES NOMINAL IN
length2.000 INCHES NOMINAL IN
materialSTEEL COMP 303
hole_diameter0.322 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
effective_height0.445 INCHES NOMINAL IN
effective_length0.680 INCHES NOMINAL IN
style_designatorSQUARE
material_document_and_classificationASTM A582 COND A ASSN STD SINGLE MATERIAL RESPONSE
outside_edge_to_bolt_hole_center_distance_along_width0.310 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length1.000 INCHES NOMINAL IN
NSN5340-01-381-9906
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5224119-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 COND A ASSN STD SINGLE MATERIAL RESPONSE
•
EFFECTIVE LENGTH: 0.680 INCHES NOMINAL IN
•
EFFECTIVE HEIGHT: 0.445 INCHES NOMINAL IN
•
HEIGHT: 0.625 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 1.000 INCHES NOMINAL IN
•
WIDTH: 0.800 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH2.000 INCHES NOMINAL IN
STYLE DESIGNATORSQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 COND A ASSN STD SINGLE MATERIAL RESPONSE
EFFECTIVE LENGTH0.680 INCHES NOMINAL IN
EFFECTIVE HEIGHT0.445 INCHES NOMINAL IN
HEIGHT0.625 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH1.000 INCHES NOMINAL IN
WIDTH0.800 INCHES NOMINAL IN
MATERIALSTEEL COMP 303
HOLE DIAMETER0.322 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5224119-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5224119-1?
5224119-1 is a CLAMP,SYNCHRO.
What is the NSN for 5224119-1?
5224119-1 is cataloged in the U.S. Government catalog under NSN 5340-01-381-9906. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5224119-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.