PartsTable
Technical Data Sheet
Download PDF

5223192-1 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5223192-1: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, shank_length: 1.600 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 1.600 INCHES NOMINAL IN, shank_diameter: 0.8750 INCHES NOMINAL IN, undercut_width: 0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-296-3026, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5223192-1
NSN: 5315-01-296-3026
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 5D286 — LOCKHEED MARTIN CORP LOCKHEED MARTIN LABORATORIES M/P 24 (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
shank_length1.600 INCHES NOMINAL IN
thread_class2A A
thread_length1.600 INCHES NOMINAL IN
shank_diameter0.8750 INCHES NOMINAL IN
undercut_width0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
first_end_styleCHAMFERED
second_end_styleCHAMFERED
special_featuresLUBRICANT DRY FILM SURFACE TREATMENT
style_designatorUNDERCUT
thread_directionRIGHT-HAND
undercut_diameter0.770 INCHES NOMINAL IN
NSN5315-01-296-3026
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5223192-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.8750 INCHES NOMINAL IN
•
SECOND SHANK DIAMETER: 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM IN
•
UNDERCUT WIDTH: 0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.090 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.770 INCHES NOMINAL IN
•
FIRST END LOCATION: THREADED END
•
SECOND END TAPER ANGLE: 30.0 DEGREES NOMINAL
•
THREAD LENGTH: 1.600 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.8750 INCHES NOMINAL IN
SECOND SHANK DIAMETER1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM IN
UNDERCUT WIDTH0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.090 INCHES NOMINAL IN
UNDERCUT DIAMETER0.770 INCHES NOMINAL IN
FIRST END LOCATIONTHREADED END
SECOND END TAPER ANGLE30.0 DEGREES NOMINAL
THREAD LENGTH1.600 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH1.600 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5223192-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5223192-1?
5223192-1 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 5223192-1?
5223192-1 is cataloged in the U.S. Government catalog under NSN 5315-01-296-3026. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5223192-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.