PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5216X1
5216X1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 80.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 1.7500 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-540-4582, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5216X1
NSN: 3110-00-540-4582
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter80.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width1.7500 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
special_featuresBEARING FURNISHED WITH RUST INHIBITOR /FOR STORAGE)
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter140.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-540-4582
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5216X1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 140.00 MILLIMETERS NOMINAL MM
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
BORE DIAMETER80.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER140.00 MILLIMETERS NOMINAL MM
CONTACT ANGLE25.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
OVERALL WIDTH1.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
1216SAInterchangeable
interchangeable cross-reference
interchangeable
1216Interchangeable
interchangeable cross-reference
interchangeable
190557Interchangeable
interchangeable cross-reference
interchangeable
A-A-59640Interchangeable
interchangeable cross-reference
interchangeable
01-49-01Interchangeable
interchangeable cross-reference
interchangeable
5201Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5216X1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5216X1?
5216X1 is a BEARING,BALL,ANNULAR.
What parts can replace 5216X1?
There are 33 known substitutes for 5216X1: 1216SA, 1216, 190557 and 30 more. Substitute compatibility should be verified for your specific system.
Is 5216X1 still available?
5216X1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5216X1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026