PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5210HDC
5210HDC ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, load_direction: RADIAL, surface_finish: GROUND, retainer_fabrication_method: PRESSED, standard_tolerance_designation: ABEC NO.1, internal_fit-up_contact_angular_direction: OUTWARD CONVERGENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3094, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5210HDC
NSN: 3110-00-554-3094
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
load_directionRADIAL
surface_finishGROUND
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
internal_fit-up_contact_angular_directionOUTWARD CONVERGENT
NSN3110-00-554-3094
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5210HDC · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
MATERIALSTEEL OVERALL
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
250820Interchangeable
interchangeable cross-reference
interchangeable
SKF5210AInterchangeable
interchangeable cross-reference
interchangeable
5210RHInterchangeable
interchangeable cross-reference
interchangeable
5210HInterchangeable
interchangeable cross-reference
interchangeable
11-010Interchangeable
interchangeable cross-reference
interchangeable
B107.1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5210HDC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5210HDC?
5210HDC is a BEARING,BALL,ANNULAR.
What parts can replace 5210HDC?
There are 7 known substitutes for 5210HDC: 250820, SKF5210A, 5210RH and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5210HDC?
5210HDC is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5210HDC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026