PartsTable
Technical Data Sheet
Download PDF

5210092 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5210092: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 1.122 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN, overall_length: 3.750 INCHES NOMINAL IN, undercut_width: 0.430 INCHES NOMINAL IN, first_end_style: CHAMFERED, effective_length: 1.660 INCHES NOMINAL IN, style_designator: GROOVE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-338-7014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5210092
NSN: 5315-01-338-7014
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter1.122 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
overall_length3.750 INCHES NOMINAL IN
undercut_width0.430 INCHES NOMINAL IN
first_end_styleCHAMFERED
effective_length1.660 INCHES NOMINAL IN
style_designatorGROOVE
undercut_diameter0.883 INCHES NOMINAL IN
first_end_locationBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.094 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-338-7014
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5210092 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.430 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.094 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.883 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
DIAMETER: 1.122 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.430 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.094 INCHES NOMINAL IN
UNDERCUT DIAMETER0.883 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
DIAMETER1.122 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
OVERALL LENGTH3.750 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5210069 PART 20Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5210092?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5210092?
5210092 is a PIN,GROOVED,HEADLESS.
What parts can replace 5210092?
There is 1 known substitute for 5210092: 5210069 PART 20. Substitute compatibility should be verified for your specific system.
What is the NSN for 5210092?
5210092 is cataloged in the U.S. Government catalog under NSN 5315-01-338-7014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5210092

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.