PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5209L1214A
5209L1214A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 45.00 MILLIMETERS NOMINAL MM, overall_width: 1.1875 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-678-7971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5209L1214A
NSN: 3110-00-678-7971
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter45.00 MILLIMETERS NOMINAL MM
overall_width1.1875 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
internal_clearance0.0007 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
overall_outside_diameter85.00 MILLIMETERS NOMINAL MM
nondefinitive_spec/std_data145 TYPE AND 00 GRADE
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-678-7971
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5209L1214A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
OVERALL OUTSIDE DIAMETER: 85.00 MILLIMETERS NOMINAL MM
•
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL MM
•
INTERNAL CLEARANCE: 0.0007 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
•
LOAD DIRECTION: ANGULAR
•
NONDEFINITIVE SPEC/STD DATA: 145 TYPE AND 00 GRADE
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
OVERALL WIDTH1.1875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER85.00 MILLIMETERS NOMINAL MM
BORE DIAMETER45.00 MILLIMETERS NOMINAL MM
INTERNAL CLEARANCE0.0007 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL IN
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
LOAD DIRECTIONANGULAR
NONDEFINITIVE SPEC/STD DATA145 TYPE AND 00 GRADE
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
181-61Interchangeable
interchangeable cross-reference
interchangeable
43209Interchangeable
interchangeable cross-reference
interchangeable
3209Interchangeable
interchangeable cross-reference
interchangeable
2501137Interchangeable
interchangeable cross-reference
interchangeable
128-104-092Interchangeable
interchangeable cross-reference
interchangeable
N0S30Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5209L1214A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5209L1214A?
5209L1214A is a BEARING,BALL,ANNULAR.
What parts can replace 5209L1214A?
There are 22 known substitutes for 5209L1214A: 181-61, 43209, 3209 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5209L1214A?
5209L1214A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-678-7971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5209L1214A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026