PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5208M
5208M ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 26.8 MILLIMETERS NOMINAL MM, drive_end_shape: SQUARE SINGLE END INTERNAL, style_designator: INTERNAL-INTERNAL, features_provided: MANUAL TOOL, surface_treatment: CHROMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5208M
NSN: 3110-00-156-7884
FSC: 3110
CAGE: 39317 — MCGILL MANUFACTURING COMPANY INC USE CAGE CODE 92563 FOR CATALOGING. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length26.8 MILLIMETERS NOMINAL MM
drive_end_shapeSQUARE SINGLE END INTERNAL
style_designatorINTERNAL-INTERNAL
features_providedMANUAL TOOL
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.375 INCHES NOMINAL SINGLE END IN
wrenching_surface_size8.0 MILLIMETERS NOMINAL SINGLE END MM
wrenching_surface_shape12 POINT SINGLE END INTERNAL
NSN3110-00-156-7884
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5208M · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER80.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
LUBRICATION MATERIALOIL LUBRICATING
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONANGULAR
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
905208Interchangeable
interchangeable cross-reference
interchangeable
P60-118Interchangeable
interchangeable cross-reference
interchangeable
10090Interchangeable
interchangeable cross-reference
interchangeable
S-1490Interchangeable
interchangeable cross-reference
interchangeable
849546-13Interchangeable
interchangeable cross-reference
interchangeable
4912568Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5208M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5208M?
5208M is a BEARING,BALL,ANNULAR.
What parts can replace 5208M?
There are 27 known substitutes for 5208M: 905208, P60-118, 10090 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5208M?
5208M is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7884. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5208M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026