PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5205SB
5205SB ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 15.00 MILLIMETERS NOMINAL MM, overall_width: 0.6250 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-5878, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5205SB
NSN: 3110-00-158-5878
FSC: 3110
CAGE: 29201 — JOHN DEER CONSUMER PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter15.00 MILLIMETERS NOMINAL MM
overall_width0.6250 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
special_featuresMODIFIED BALL COMPLEMENT W1 HEAT TREATED RETAINER
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-158-5878
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5205SB · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
BORE DIAMETER: 15.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
BORE DIAMETER15.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
XU16031Interchangeable
interchangeable cross-reference
interchangeable
5202WInterchangeable
interchangeable cross-reference
interchangeable
19H67-1Interchangeable
interchangeable cross-reference
interchangeable
5202X1AInterchangeable
interchangeable cross-reference
interchangeable
905202Interchangeable
interchangeable cross-reference
interchangeable
8351889Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5205SB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5205SB?
5205SB is a BEARING,BALL,ANNULAR.
What parts can replace 5205SB?
There are 15 known substitutes for 5205SB: XU16031, 5202W, 19H67-1 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5205SB?
5205SB is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-5878. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5205SB

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026