PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5204AS
5204AS ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include overall_width: 0.8120 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND, lubrication_material: LUBRICANT, internal_fit-up_designation: STANDARD, standard_tolerance_designation: ABEC NO.1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5204AS
NSN: 3110-00-156-4822
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
overall_width0.8120 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
lubrication_materialLUBRICANT
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
internal_fit-up_contact_angular_directionINWARD CONVERGENT
NSN3110-00-156-4822
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5204AS · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: LUBRICANT
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.8120 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALLUBRICANT
SURFACE FINISHGROUND
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
10-1100Interchangeable
Indicator-Transmitter,ship's Con
interchangeable
4810PL0855420Interchangeable
interchangeable cross-reference
interchangeable
47560Interchangeable
interchangeable cross-reference
interchangeable
695526-3Interchangeable
interchangeable cross-reference
interchangeable
10120613Interchangeable
interchangeable cross-reference
interchangeable
A4-165-17Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5204AS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5204AS?
5204AS is a BEARING,BALL,ANNULAR.
What parts can replace 5204AS?
There are 19 known substitutes for 5204AS: 10-1100, 4810PL0855420, 47560 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5204AS?
5204AS is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5204AS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026