PartsTable
Technical Data Sheet
Download PDF

5203HCDC — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5203HCDC: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.6875 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-800-8094, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5203HCDC
NSN: 3110-00-800-8094
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter17.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width0.6875 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter40.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-800-8094
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5203HCDC · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 40.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH0.6875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER40.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER17.00 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 4
5203X1AReference document
Same NSN cross-reference
Reference document — Secondary reference
5203X1U7Reference document
Same NSN cross-reference
Reference document — Secondary reference
5203RHMT1Reference document
Same NSN cross-reference
Reference document — Secondary reference
306643-35Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 5203HCDC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5203HCDC?
5203HCDC is a BEARING,BALL,ANNULAR.
What parts can replace 5203HCDC?
There are 4 known substitutes for 5203HCDC: 5203X1A, 5203X1U7, 5203RHMT1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5203HCDC?
5203HCDC is cataloged in the U.S. Government catalog under NSN 3110-00-800-8094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5203HCDC