PartsTable
Technical Data Sheet
52016 ✓ Verified by PartsTable
UNYKAch · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 2009 U3 model is a Slim Micro ATX case. Its design is minimalist ic and practical, made from polished aluminum with a sleek black finish. Due to its practical design, it includes a sturdy, automatic vertical support, making handling easier and boasts several connectors on the front, like USB 3.0, USB 2.0, audio, microphone ports and an MS / MMC / SD card reader.<br><br>For powerful cooling and better thermal adaptation ,it includes thermal solution in the form of a quiet 8 cm fan with motherboard feed.<br>To gain even more power, it includes a Micro ATX 450w power supply.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-145-1355, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
52016
NSN: 5330-00-145-1355
FSC: 5330
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialPLASTIC FRAME
duty_typeCONTINUOUS
body_styleCYLINDRICAL FRAME
body_width0.245 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
lens_colorBLACK
body_height0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length2.750 INCHES NOMINAL IN
storage_typeGENERAL PURPOSE WAREHOUSE
body_diameter1.563 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_height2.500 INCHES NOMINAL IN
fragility_factorMODERATELY RUGGED
NSN5330-00-145-1355
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 52016 MFR: UNYKAch ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
717-014864Interchangeable
interchangeable cross-reference
interchangeable
LD25031Interchangeable
interchangeable cross-reference
interchangeable
52016Interchangeable
interchangeable cross-reference
interchangeable
72-09720-051Interchangeable
interchangeable cross-reference
interchangeable
72-0972-051Interchangeable
interchangeable cross-reference
interchangeable
C74-22119Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 52016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52016?
52016 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by UNYKAch.
What parts can replace 52016?
There are 28 known substitutes for 52016: 717-014864, LD25031, 52016 and 25 more. Substitute compatibility should be verified for your specific system.
Is 52016 still available?
52016 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52016