PartsTable
Technical Data Sheet
52013 ✓ Verified by PartsTable
UNYKAch · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The power supply 52013 in SFX Micro ATX 450W format, has multiple protection systems against overvoltage, low voltage, overcurrent and short circuits. It also includes an ultra-quiet 80mm fan. A perfect choice for desktops due to its small size and its great features.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
52013
NSN: 5315-00-276-4415
FSC: 5315
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
radius0.077 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
materialSTEEL OVERALL
shaft_typeROUND SINGLE ACTUATOR
shaft_length0.875 INCHES NOMINAL SINGLE ACTUATOR IN
overall_width1.312 INCHES NOMINAL IN
pole_quantity1 FIRST SECTION FRONT
terminal_typeTAB, SOLDER LUG
thread_length0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height1.562 INCHES NOMINAL IN
overall_length4.500 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity5 FIRST SECTION FRONT
NSN5315-00-276-4415
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 52013 · UNYKAch ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
RADIUS: 0.077 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL: STEEL OVERALL
STARTING EDGE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
RADIUS0.077 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
OVERALL LENGTH0.565 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
OVERALL HEIGHT0.220 INCHES MINIMUM AND 0.222 INCHES MAXIMUM IN
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
OVERALL WIDTH0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
STARTING EDGE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
52103Interchangeable
interchangeable cross-reference
interchangeable
52105Interchangeable
interchangeable cross-reference
interchangeable
WM-MSInterchangeable
interchangeable cross-reference
interchangeable
52.103Interchangeable
interchangeable cross-reference
interchangeable
58-12Interchangeable
interchangeable cross-reference
interchangeable
R126Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 52013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52013?
52013 is a SWITCH,ROTARY manufactured by UNYKAch.
What parts can replace 52013?
There are 27 known substitutes for 52013: 52103, 52105, WM-MS and 24 more. Substitute compatibility should be verified for your specific system.
Is 52013 still available?
52013 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52013