520119: 520119.
The 520119 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 110 OVERALL, hole_diameter: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.542 INCHES MINIMUM AND 2.582 INCHES MAXIMUM IN, overall_length: 2.542 INCHES MINIMUM AND 2.582 INCHES MAXIMUM IN, aperture_diameter: 1.550 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN, outside_corner_radius: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 6625-00-003-1356, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | COPPER ALLOY 110 OVERALL |
| hole_diameter | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
| overall_width | 2.542 INCHES MINIMUM AND 2.582 INCHES MAXIMUM IN |
| overall_length | 2.542 INCHES MINIMUM AND 2.582 INCHES MAXIMUM IN |
| aperture_diameter | 1.550 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN |
| outside_corner_radius | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| material_document_and_classification | AMS 4500 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| outside_edge_to_bolt_hole_center_distance_along_width | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| outside_edge_to_bolt_hole_center_distance_along_length | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| center_to_center_distance_between_bolt_holes_along_width | 2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
| center_to_center_distance_between_bolt_holes_along_length | 2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
| NSN | 6625-00-003-1356 |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED STUD(S) |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 2.719 INCHES NOMINAL IN |
| OVERALL HEIGHT | 3.125 INCHES NOMINAL IN |
| MOUNTING ARRANGEMENT STYLE | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| METER DEPTH BEHIND MOUNTING FLANGE | 1.150 INCHES NOMINAL IN |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| ACCURACY IN PERCENT | -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.250 INCHES NOMINAL IN |
| MOUNTING STUD DIAMETER | 0.128 INCHES NOMINAL IN |