PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5200HC
5200HC ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 10.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.5625 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-5877, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5200HC
NSN: 3110-00-158-5877
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter10.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width0.5625 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter30.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-158-5877
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5200HC · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: TIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONTIGHT
RETAINER FABRICATION METHODPRESSED
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONTIGHT
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONANGULAR
OVERALL OUTSIDE DIAMETER30.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5200SBQ5A7Interchangeable
interchangeable cross-reference
interchangeable
5200HInterchangeable
interchangeable cross-reference
interchangeable
5200HCInterchangeable
interchangeable cross-reference
interchangeable
5200X1AInterchangeable
interchangeable cross-reference
interchangeable
233101Interchangeable
interchangeable cross-reference
interchangeable
233101 PART 2331Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5200HC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5200HC?
5200HC is a BEARING,BALL,ANNULAR.
What parts can replace 5200HC?
There are 12 known substitutes for 5200HC: 5200SBQ5A7, 5200H, 5200HC and 9 more. Substitute compatibility should be verified for your specific system.
Is 5200HC still available?
5200HC is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5200HC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026