PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5200-22-6
5200-22-6 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,U is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OVERALL, thread_class: 2A A, thread_length: 1.875 INCHES MINIMUM IN, style_designator: SQUARE BEND, thread_direction: RIGHT-HAND, nominal_thread_diameter: 0.750 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-271-6215, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5200-22-6
NSN: 5306-00-271-6215
FSC: 5306
CAGE: 81336 — CHIEF OF ENGINEERS DEPT OF ARMY (USA)
SPECIFICATIONS
materialSTEEL COMP 1045 OVERALL
thread_class2A A
thread_length1.875 INCHES MINIMUM IN
style_designatorSQUARE BEND
thread_directionRIGHT-HAND
nominal_thread_diameter0.750 INCHES IN
thread_quantity_per_inch16
thread_series_designatorUNF
inside_distance_between_shanks2.562 INCHES NOMINAL IN
material_document_and_classificationQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_inside_center_of_bend_to_bolt_end10.875 INCHES NOMINAL IN
NSN5306-00-271-6215
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5200-22-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1045 OVERALL
•
STYLE DESIGNATOR: SQUARE BEND
•
THREAD QUANTITY PER INCH: 16
•
THREAD SERIES DESIGNATOR: UNF
•
INSIDE DISTANCE BETWEEN SHANKS: 2.562 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 10.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1045 OVERALL
STYLE DESIGNATORSQUARE BEND
THREAD QUANTITY PER INCH16
THREAD SERIES DESIGNATORUNF
INSIDE DISTANCE BETWEEN SHANKS2.562 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.750 INCHES IN
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END10.875 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
308-011Interchangeable
Sm-A226b
interchangeable
308-011-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5200-22-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5200-22-6?
5200-22-6 is a BOLT,U.
What parts can replace 5200-22-6?
There are 2 known substitutes for 5200-22-6: 308-011, 308-011-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 5200-22-6?
5200-22-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-271-6215. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5200-22-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026