PartsTable
Technical Data Sheet
Download PDF

5200-020097CP — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5200-020097CP: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.348 INCHES NOMINAL IN, center_hole_diameter: 0.202 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-571-7609, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5200-020097CP
NSN: 5330-01-571-7609
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.348 INCHES NOMINAL IN
center_hole_diameter0.202 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM IN
cross-sectional_shape_styleO-RING
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
cross_section_outside_diameter0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5330-01-571-7609
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5200-020097CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 0.348 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.202 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
CROSS-SECTIONAL SHAPE STYLEO-RING
ELONGATION PERCENTAGE125 MAXIMUM
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER0.348 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.202 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
26-29XX-XXXXA020-015CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
G547-0002-26-29XX-XXXXA020-15CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
26-29XX-XXXXA020-015Reference document
Same NSN cross-reference
Reference document — Secondary reference
7550478-26-29XX-XXXXA020-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
G547-0002-26-29XX-XXXXA020-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
M83248/1-009CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5200-020097CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5200-020097CP?
5200-020097CP is a PACKING,PREFORMED.
What parts can replace 5200-020097CP?
There are 9 known substitutes for 5200-020097CP: 26-29XX-XXXXA020-015CP, G547-0002-26-29XX-XXXXA020-15CP, 26-29XX-XXXXA020-015 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5200-020097CP?
5200-020097CP is cataloged in the U.S. Government catalog under NSN 5330-01-571-7609. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5200-020097CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.