PartsTable
Technical Data Sheet
Download PDF

520.126 — RESISTOR,FIXED,COMPOSITION

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

520.126: RESISTOR,FIXED,COMPOSITION.

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include body_length: 0.375 INCHES NOMINAL IN, body_diameter: 0.138 INCHES NOMINAL IN, cubic_measure: 0.007 CUBIC INCHES, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_length: 1.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-126-6705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 520.126
NSN: 5905-00-126-6705
NIINs: 001266705, 009271802, 014220461
FSC: 5905 — Resistor
CAGE: 16067 — CALIFORNIA INSTRUMENTS CORP (USA)
SPECIFICATIONS
body_length0.375 INCHES NOMINAL IN
body_diameter0.138 INCHES NOMINAL IN
cubic_measure0.007 CUBIC INCHES
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_length1.500 INCHES NOMINAL IN
style_designatorAXIAL TERMINAL EACH END
electrical_resistance4.700 OHMS
reliability_indicatorESTABLISHED
supplementary_featuresSHAFT MAGNETIC
end_item_identificationTURBINE ROTOR,TURBOSUPERCHARGER,DIESEL ENGINE
specification/standard_data81349-MIL-R-39008/2 GOVERNMENT SPECIFICATION
NSN5905-00-126-6705
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,COMPOSITION TITLE COMPONENT PN 520.126 MFR RESISTOR,FIXED,COMPOSI
KEY FEATURES
•
RESISTANCE TOLERANCE IN PERCENT: -5.000 TO 5.000
•
BODY DIAMETER: 0.138 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE: 4.700 OHMS
•
INCLOSURE TYPE: ENCAPSULATED
•
TERMINAL TYPE: WIRE LEAD
•
TERMINAL LENGTH: 1.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: AXIAL TERMINAL EACH END
•
RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.001
TECHNICAL CHARACTERISTICS
RESISTANCE TOLERANCE IN PERCENT-5.000 TO 5.000
BODY DIAMETER0.138 INCHES NOMINAL IN
ELECTRICAL RESISTANCE4.700 OHMS
INCLOSURE TYPEENCAPSULATED
TERMINAL TYPEWIRE LEAD
TERMINAL LENGTH1.500 INCHES NOMINAL IN
STYLE DESIGNATORAXIAL TERMINAL EACH END
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.001
POWER DISSIPATION RATING IN WATTS0.500 FREE AIR
AMBIENT TEMP AT FULL RATED POWER70.0 CELSIUS DEGC
SUBSTITUTES & CROSS-REFERENCES 9
N400-612-007Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CB47G5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
24500107Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
280-7176P2Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
4171306-694Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
000478Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 520.126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 520.126?
520.126 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 520.126?
There are 9 known substitutes for 520.126: N400-612-007, CB47G5, 24500107 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 520.126?
520.126 is cataloged in the U.S. Government catalog under NSN 5905-00-126-6705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 520.126