PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 52-95F 1 1/4 IN AND 3-430-1
52-95F 1 1/4 IN AND 3-430-1 ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The 52-95F 1 1/4 IN AND 3-430-1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-274-4714, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
52-95F 1 1/4 IN AND 3-430-1
NSN: 4820-01-274-4714
FSC: 4820
CAGE: 09032 — TATE ANDALE, LLC (USA)
SPECIFICATIONS
Part Number52-95F 1 1/4 IN AND 3-430-1
NSN4820-01-274-4714
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 52-95F 1 1/4 IN AND 3-430-1 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE FACE DESIGN: PLAIN ALL ENDS
•
NOMINAL OUTSIDE DIAMETER: 4.625 INCHES ALL ENDS IN
•
FACE TO FACE DISTANCE: 6.750 INCHES IN
•
FLANGE SHAPE: ROUND WITH HOLES ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU FLANGED ENDS
•
OPERATING PRESSURE: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
CONNECTION TYPE: FLANGE ALL ENDS
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE FACE DESIGNPLAIN ALL ENDS
NOMINAL OUTSIDE DIAMETER4.625 INCHES ALL ENDS IN
SPECIAL FEATURESFLOW CONTROL DEVICE: PLUG
FACE TO FACE DISTANCE6.750 INCHES IN
FLANGE SHAPEROUND WITH HOLES ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU FLANGED ENDS
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
CONNECTION TYPEFLANGE ALL ENDS
VALVE SIZE1.250 INCHES IN
MOUNTING POSITIONVERTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
3401Interchangeable
interchangeable cross-reference
interchangeable
FGFS1201Interchangeable
interchangeable cross-reference
interchangeable
LFF1201Interchangeable
interchangeable cross-reference
interchangeable
W-D-1114 CLASZ1/2ST4Interchangeable
interchangeable cross-reference
interchangeable
DW140 WITH CASEInterchangeable
interchangeable cross-reference
interchangeable
5130-00-901-7585Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 52-95F 1 1/4 IN AND 3-430-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52-95F 1 1/4 IN AND 3-430-1?
52-95F 1 1/4 IN AND 3-430-1 is a 52-95F 1 1/4 IN AND 3-430-1.
What parts can replace 52-95F 1 1/4 IN AND 3-430-1?
There are 20 known substitutes for 52-95F 1 1/4 IN AND 3-430-1: 3401, FGFS1201, LFF1201 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 52-95F 1 1/4 IN AND 3-430-1?
52-95F 1 1/4 IN AND 3-430-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-01-274-4714. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52-95F 1 1/4 IN AND 3-430-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026