PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5199367
5199367 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE NITRILE SEALING ELEMENT, seal_width: 0.250 INCHES NOMINAL IN, outside_diameter: 1.441 INCHES NOMINAL IN, special_features: SEALING ELEMENT MATERIAL:ANY ACCEPTABLE;, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.437 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-052-6376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5199367
NSN: 5330-01-052-6376
FSC: 5330
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE NITRILE SEALING ELEMENT
seal_width0.250 INCHES NOMINAL IN
outside_diameter1.441 INCHES NOMINAL IN
special_featuresSEALING ELEMENT MATERIAL:ANY ACCEPTABLE;
surface_treatmentPLASTIC CASE
housing_bore_diameter1.437 INCHES NOMINAL IN
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
NSN5330-01-052-6376
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5199367 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: RUBBER BUTADIENE NITRILE SEALING ELEMENT
•
HOUSING BORE DIAMETER: 1.437 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.441 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.250 INCHES NOMINAL IN
SPECIAL FEATURESSEALING ELEMENT MATERIAL:ANY ACCEPTABLE;
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER BUTADIENE NITRILE SEALING ELEMENT
HOUSING BORE DIAMETER1.437 INCHES NOMINAL IN
OUTSIDE DIAMETER1.441 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
9837Interchangeable
interchangeable cross-reference
interchangeable
N09837Interchangeable
interchangeable cross-reference
interchangeable
983-S-7Interchangeable
interchangeable cross-reference
interchangeable
M3988Interchangeable
interchangeable cross-reference
interchangeable
SM-A-839402-3Interchangeable
interchangeable cross-reference
interchangeable
B5199366Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5199367?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5199367?
5199367 is a SEAL,PLAIN.
What parts can replace 5199367?
There are 7 known substitutes for 5199367: 9837, N09837, 983-S-7 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5199367?
5199367 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-052-6376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5199367

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026