PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5193117
5193117 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET SET is a the manufacturer industrial component. Key specifications include width: 4.594 INCHES NOMINAL IN, length: 6.594 INCHES NOMINAL IN, material: STEEL, inside_width: 3.156 INCHES NOMINAL IN, document_type: INDUSTRIAL DRAWING, hole_diameter: 0.438 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-166-8622, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5193117
NSN: 5330-00-166-8622
FSC: 5330
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
width4.594 INCHES NOMINAL IN
length6.594 INCHES NOMINAL IN
materialSTEEL
inside_width3.156 INCHES NOMINAL IN
document_typeINDUSTRIAL DRAWING
hole_diameter0.438 INCHES NOMINAL IN
inside_length5.156 INCHES NOMINAL IN
body_thickness0.062 INCHES NOMINAL IN
document_source72582
flange_thickness0.156 INCHES NOMINAL IN
fsc_application_dataCYLINDER BLOCK HAND HOLE COVERS,DIESEL ENGINE
inside_corner_radius0.500 INCHES NOMINAL IN
NSN5330-00-166-8622
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5193117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DOCUMENT SOURCE: 72582
•
DOCUMENT TYPE: INDUSTRIAL DRAWING
•
DOCUMENT IDENTIFICATION: 5198676
•
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
TECHNICAL CHARACTERISTICS (FLIS)
DOCUMENT SOURCE72582
DOCUMENT TYPEINDUSTRIAL DRAWING
DOCUMENT IDENTIFICATION5198676
COMPONENT DOCUMENT ORIGININDUSTRIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
211570Interchangeable
interchangeable cross-reference
interchangeable
31433HInterchangeable
interchangeable cross-reference
interchangeable
634303Interchangeable
interchangeable cross-reference
interchangeable
2509-1Interchangeable
interchangeable cross-reference
interchangeable
8921151Interchangeable
interchangeable cross-reference
interchangeable
5153117Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5193117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5193117?
5193117 is a GASKET SET.
What parts can replace 5193117?
There are 19 known substitutes for 5193117: 211570, 31433H, 634303 and 16 more. Substitute compatibility should be verified for your specific system.
Is 5193117 still available?
5193117 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5193117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026