5191421: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q CUSHION, lug_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, overall_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-226-9173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| diameter | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| material | RUBBER SILICONE CLASS Q CUSHION |
| lug_width | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| overall_width | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| style_designator | RIGHT HAND CLAMP & BRACKET |
| tongue_hole_type | ROUND, UNTHREADED |
| lug_hole_diameter | 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN |
| material_thickness | 0.051 INCHES NOMINAL IN |
| loop_inside_diameter | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| fastening_device_type | SELF-LOCKING HEXAGON NUT |
| integral_nut_type_and_quantity | 1 SELF-LOCKING EQUAL LENGTH TONGUES |
| cushioning_environmental_protection | ABRASION RESISTANT AND FLAME RESISTANT |
| NSN | 5340-01-226-9173 |
| LUG HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN |
| CUSHIONING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FLAME RESISTANT |
| CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | 0.672 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN |
| FASTENING DEVICE TYPE | SELF-LOCKING HEXAGON NUT |
| DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | RIGHT HAND CLAMP & BRACKET |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3303 FED SPEC SINGLE MATERIAL RESPONSE CUSHION |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T3 FED SPEC ALL MATERIAL RESPONSES OR QQ-A-250/5,T4 FED SPEC ALL MATERIAL RESPONSES BAND |
| DIAMETER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| OVERALL WIDTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.