PartsTable
Technical Data Sheet
Download PDF

5191317-4 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5191317-4: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_width: 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN, overall_length: 1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN, fsc_application_data: ELECTRICAL CONNECTOR, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-961-5347, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5191317-4
NSN: 5330-00-961-5347
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_width0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
overall_length1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN
fsc_application_dataELECTRICAL CONNECTOR
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-961-5347
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5191317-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: ELECTRICAL CONNECTOR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAELECTRICAL CONNECTOR
OVERALL LENGTH1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
DB53750-2DSReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
C5000261-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
802347-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1137AS725Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
419116-3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
DB53750-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5191317-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5191317-4?
5191317-4 is a GASKET.
What parts can replace 5191317-4?
There are 6 known substitutes for 5191317-4: DB53750-2DS, C5000261-3, 802347-3 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5191317-4?
5191317-4 is cataloged in the U.S. Government catalog under NSN 5330-00-961-5347. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5191317-4