PartsTable
Technical Data Sheet
Download PDF

5190827 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5190827: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6061 OVERALL, overall_width: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, overall_length: 2.380 INCHES MINIMUM AND 2.420 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-212-1342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5190827
NSN: 5340-01-212-1342
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6061 OVERALL
overall_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
overall_length2.380 INCHES MINIMUM AND 2.420 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE OVERALL
material_thickness0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_first_and_second_holes2.000 INCHES NOMINAL IN
NSN5340-01-212-1342
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5190827 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
OVERALL LENGTH2.380 INCHES MINIMUM AND 2.420 INCHES MAXIMUM IN
OVERALL WIDTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
MATERIAL THICKNESS0.118 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES2.000 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE OVERALL
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5190827?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5190827?
5190827 is a CLAMP,LOOP.
What is the NSN for 5190827?
5190827 is cataloged in the U.S. Government catalog under NSN 5340-01-212-1342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5190827

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.