PartsTable
Technical Data Sheet
Download PDF

5190796 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5190796: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN, height: 0.283 INCHES NOMINAL IN, length: 0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6061, hole_diameter: 0.125 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-339-4517, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5190796
NSN: 5340-01-339-4517
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
height0.283 INCHES NOMINAL IN
length0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6061
hole_diameter0.125 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
special_featuresONE ADDITIONAL HOLE LOCATED ON LOCK LEG,0.144 IN. MIN AND 0.152 IN. MAX DIA IN
surface_treatmentANODIZE
material_document_and_classificationQQ-A-250/11,TEMPER 651 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
NSN5340-01-339-4517
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5190796 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11,TEMPER 651 FED SPEC SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.283 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE
•
WIDTH: 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS
LENGTH0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11,TEMPER 651 FED SPEC SINGLE MATERIAL RESPONSE
HEIGHT0.283 INCHES NOMINAL IN
SPECIAL FEATURESONE ADDITIONAL HOLE LOCATED ON LOCK LEG,0.144 IN. MIN AND 0.152 IN. MAX DIA IN
SURFACE TREATMENTANODIZE
WIDTH0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 6061
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.125 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5190796?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5190796?
5190796 is a CLAMP,SYNCHRO.
What is the NSN for 5190796?
5190796 is cataloged in the U.S. Government catalog under NSN 5340-01-339-4517. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5190796

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.