PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5190415
5190415 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WIRE ROPE ASSEMBLY,SINGLE LEG is a the manufacturer industrial component. Key specifications include end_type: LOOP FIRST END, overall_length: 1.515 FEET NOMINAL FT, attachment_style: STRAIGHT FIRST INTERMEDIATE ATTACHMENT, loop_retention_method: SWAGE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-238-0848, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5190415
NSN: 5315-00-238-0848
FSC: 5315
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
end_typeLOOP FIRST END
overall_length1.515 FEET NOMINAL FT
attachment_styleSTRAIGHT FIRST INTERMEDIATE ATTACHMENT
loop_retention_methodSWAGE
NSN5315-00-238-0848
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5190415 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL LENGTH: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
•
FEATURES PROVIDED: CASEHARDENED
•
PIN OVERALL DIAMETER: 0.3090 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END STYLECHAMFERED
PIN OVERALL LENGTH1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
PIN OVERALL DIAMETER0.3090 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
HARDNESS RATING58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
A1853Interchangeable
interchangeable cross-reference
interchangeable
600103Interchangeable
interchangeable cross-reference
interchangeable
0098-LL-TJ2-4697Interchangeable
interchangeable cross-reference
interchangeable
5190415Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-14652BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5190415?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5190415?
5190415 is a WIRE ROPE ASSEMBLY,SINGLE LEG.
What parts can replace 5190415?
There are 5 known substitutes for 5190415: A1853, 600103, 0098-LL-TJ2-4697 and 2 more. Substitute compatibility should be verified for your specific system.
Is 5190415 still available?
5190415 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5190415

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026