PartsTable
Technical Data Sheet
Download PDF

5190304 — TUBE ASSEMBLY,METAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5190304: TUBE ASSEMBLY,METAL.

The TUBE ASSEMBLY,METAL is a the manufacturer industrial component. Key specifications include width: 2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN, length: 2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6061, corner_radius: 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, hole_diameter: 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN, body_thickness: 0.170 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-314-6865, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5190304
NSN: 5340-01-314-6865
NIINs: 013146865, 013587614
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN
length2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6061
corner_radius0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
hole_diameter0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
body_thickness0.170 INCHES NOMINAL IN
flange_thickness0.183 INCHES NOMINAL IN
special_featuresTWO CUTS MADE INTO FLANGE THICKNESS; COLOR NO. 17875
surface_treatmentPAINT POLYURETHANE
securing_device_typeSPECIAL
peripheral_shape_styleRECTANGLE, FOUR HOLES
first_recess_inside_height0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
NSN5340-01-314-6865
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5190304 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.281 INCHES NOMINAL IN
•
CORNER RADIUS: 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
LENGTH: 2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 1.628 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.183 INCHES NOMINAL IN
•
FIRST RECESS INSIDE HEIGHT: 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 1.628 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.281 INCHES NOMINAL IN
CORNER RADIUS0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
LENGTH2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE
DISTANCE BETWEEN HOLES ALONG LENGTH1.628 INCHES NOMINAL IN
FLANGE THICKNESS0.183 INCHES NOMINAL IN
FIRST RECESS INSIDE HEIGHT0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLES ALONG WIDTH1.628 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11,T651 FED SPEC SINGLE MATERIAL RESPONSE
SUBSTITUTES & CROSS-REFERENCES 1
5342PL0962410Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5190304?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5190304?
5190304 is a TUBE ASSEMBLY,METAL.
What parts can replace 5190304?
There is 1 known substitute for 5190304: 5342PL0962410. Substitute compatibility should be verified for your specific system.
What is the NSN for 5190304?
5190304 is cataloged in the U.S. Government catalog under NSN 5340-01-314-6865. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5190304

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.