PartsTable
Technical Data Sheet
Download PDF

518P — NUT,SELF-LOCKING,CAP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

518P: NUT,SELF-LOCKING,CAP.

The NUT,SELF-LOCKING,CAP is a the manufacturer industrial component. Key specifications include material: FIBER LOCKING INSERT, nut_style: CAP, nut_height: 1.250 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNS, locking_feature: PREVAILING TORQUE WITH NONMETALLIC INSERT. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-527-3798, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
518P
NSN: 5310-00-527-3798
FSC: 5310 — Nuts and Washers
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)
SPECIFICATIONS
materialFIBER LOCKING INSERT
nut_styleCAP
nut_height1.250 INCHES NOMINAL IN
thread_class3B
thread_seriesUNS
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
width_across_flats1.812 INCHES NOMINAL IN
nominal_thread_size0.875 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch24
material_document_and_classificationQQ-B-626,COMP 22,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT
NSN5310-00-527-3798
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 518P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.812 INCHES NOMINAL IN
•
THREAD SERIES: UNS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
NUT HEIGHT: 1.250 INCHES NOMINAL IN
•
NUT STYLE: CAP
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.812 INCHES NOMINAL IN
THREAD SERIESUNS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,COMP 22,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT1.250 INCHES NOMINAL IN
NUT STYLECAP
THREAD CLASS3B
THREAD QUANTITY PER INCH24
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 518P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 518P?
518P is a NUT,SELF-LOCKING,CAP.
What is the NSN for 518P?
518P is cataloged in the U.S. Government catalog under NSN 5310-00-527-3798. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 518P