PartsTable
Technical Data Sheet
Download PDF

5189976 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5189976: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: IRON ALLOY OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 3.750 INCHES NOMINAL IN, first_hole_diameter: 0.108 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN, pin_overall_diameter: 0.1870 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-518-9976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5189976
NSN: 5310-00-518-9976
NIINs: 005189976, 012026343
FSC: 5310 — Nuts and Washers
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialIRON ALLOY OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length3.750 INCHES NOMINAL IN
first_hole_diameter0.108 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
pin_overall_diameter0.1870 INCHES NOMINAL IN
first_end_taper_angle10.0 DEGREES NOMINAL
first_end_taper_length0.150 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
second_end_relationship_with_first_endIDENTICAL
distance_from_centerline_of_hole_to_end_of_pin0.375 INCHES NOMINAL IN
NSN5310-00-518-9976
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5189976 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT DIAMETER: 0.858 INCHES MINIMUM AND 0.863 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.125 INCHES NOMINAL IN
•
NUT STYLE: ROUND
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT DIAMETER0.858 INCHES MINIMUM AND 0.863 INCHES MAXIMUM IN
NUT THICKNESS0.125 INCHES NOMINAL IN
NUT STYLEROUND
THREAD CLASS3B
THREAD QUANTITY PER INCH18
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5189976?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5189976?
5189976 is a NUT,PLAIN,ROUND.
What is the NSN for 5189976?
5189976 is cataloged in the U.S. Government catalog under NSN 5310-00-518-9976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5189976