PartsTable
Technical Data Sheet
Download PDF

5189913 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5189913: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include end_radius: 0.560 INCHES NOMINAL IN, fork_depth: 1.360 INCHES NOMINAL IN, hole_diameter: 0.5050 INCHES NOMINAL IN, overall_width: 2.000 INCHES NOMINAL IN, overall_height: 2.000 INCHES NOMINAL IN, fork_span_width: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-296-2108, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5189913
NSN: 5340-01-296-2108
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
end_radius0.560 INCHES NOMINAL IN
fork_depth1.360 INCHES NOMINAL IN
hole_diameter0.5050 INCHES NOMINAL IN
overall_width2.000 INCHES NOMINAL IN
overall_height2.000 INCHES NOMINAL IN
fork_span_width1.000 INCHES NOMINAL IN
special_features0.199 IN. MIN AND 0.206 IN. MAX HOLE DIA TWO PLACES IN
style_designatorCLEVIS
surface_treatmentANODIZE OVERALL
fork_arm_thickness0.500 INCHES NOMINAL IN
rod_connection_bore_depth1.000 INCHES NOMINAL IN
securing_pin_hole_diameter0.074 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
NSN5340-01-296-2108
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5189913 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.000 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.074 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.560 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.000 INCHES NOMINAL IN
FORK SPAN WIDTH1.000 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.074 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
FORK ARM THICKNESS0.500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.560 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH2.000 INCHES NOMINAL IN
SPECIAL FEATURES0.199 IN. MIN AND 0.206 IN. MAX HOLE DIA TWO PLACES IN
SURFACE TREATMENTANODIZE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5189913?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5189913?
5189913 is a CLEVIS,ROD END.
What is the NSN for 5189913?
5189913 is cataloged in the U.S. Government catalog under NSN 5340-01-296-2108. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5189913

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.