PartsTable
Technical Data Sheet
Download PDF

5188354 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5188354: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include diameter: 0.505 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, material: UNABLE TO DECODE, overall_width: 2.500 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, special_features: COLOR,GRAY, mounting_facility: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-222-2395, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5188354
NSN: 5340-01-222-2395
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.505 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
materialUNABLE TO DECODE
overall_width2.500 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
special_featuresCOLOR,GRAY
mounting_facilityUNTHREADED HOLE(S)
surface_treatmentUNABLE TO DECODE
material_thickness0.250 INCHES NOMINAL IN
first_surface_hole_size0.281 INCHES NOMINAL IN
first_surface_hole_quantity4
NSN5340-01-222-2395
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5188354 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.505 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
•
FIRST SURFACE HOLE SIZE: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.250 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
SURFACE TREATMENT: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
DIAMETER0.505 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
OVERALL LENGTH2.500 INCHES NOMINAL IN
OVERALL WIDTH2.500 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.281 INCHES NOMINAL IN
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
SPECIAL FEATURESCOLOR,GRAY
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY4
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5188354?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5188354?
5188354 is a STRIKE,CATCH.
What is the NSN for 5188354?
5188354 is cataloged in the U.S. Government catalog under NSN 5340-01-222-2395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5188354