PartsTable
Technical Data Sheet
Download PDF

5186115 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5186115: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 1.375 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 0.625 INCHES NOMINAL IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-906-0494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5186115
NSN: 5310-00-906-0494
FSC: 5310 — Nuts and Washers
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter1.375 INCHES NOMINAL IN
thread_class2B
nut_thickness0.625 INCHES NOMINAL IN
thread_seriesUN
thread_directionRIGHT-HAND
drive_point_depth0.188 INCHES NOMINAL IN
drive_point_width0.188 INCHES NOMINAL IN
small_end_diameter1.250 INCHES NOMINAL IN
undercut_thickness0.250 INCHES NOMINAL IN
nominal_thread_size1.125 INCHES IN
NSN5310-00-906-0494
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5186115 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
DRIVE POINT WIDTH: 0.188 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.125 INCHES IN
•
NUT DIAMETER: 1.375 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.188 INCHES NOMINAL IN
•
UNDERCUT THICKNESS: 0.250 INCHES NOMINAL IN
•
NUT THICKNESS: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
DRIVE POINT WIDTH0.188 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.125 INCHES IN
NUT DIAMETER1.375 INCHES NOMINAL IN
DRIVE POINT DEPTH0.188 INCHES NOMINAL IN
UNDERCUT THICKNESS0.250 INCHES NOMINAL IN
NUT THICKNESS0.625 INCHES NOMINAL IN
SMALL END DIAMETER1.250 INCHES NOMINAL IN
NUT STYLEROUND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
PC5186115Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5186115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5186115?
5186115 is a NUT,PLAIN,ROUND.
What parts can replace 5186115?
There is 1 known substitute for 5186115: PC5186115. Substitute compatibility should be verified for your specific system.
What is the NSN for 5186115?
5186115 is cataloged in the U.S. Government catalog under NSN 5310-00-906-0494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5186115

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.