PartsTable
Technical Data Sheet
Download PDF

5186-TE-199 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5186-TE-199: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR PLASTIC PHENOLIC OR PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, thickness: 0.057 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, hole_diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, overall_diameter: 1.495 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-429-5569, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5186-TE-199
NSN: 5310-01-429-5569
FSC: 5310 — Nuts and Washers
CAGE: 55566 — MATTHEW WARREN, INC DBA RAF ELECTRONIC HARDWARE DIV RAF ELECTRONIC HARDWARE, LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR PLASTIC PHENOLIC OR PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
thickness0.057 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
hole_diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
overall_diameter1.495 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-M-20693 MIL SPEC 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 1ST MATERIAL RESPONSE OR L-P-513 FED SPEC 2ND MATERIAL RESPONSE OR MIL-P-14078 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-01-429-5569
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5186-TE-199 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.495 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 MIL SPEC 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 1ST MATERIAL RESPONSE OR L-P-513 FED SPEC 2ND MATERIAL RESPONSE OR MIL-P-14078 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR PLASTIC PHENOLIC OR PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.495 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 MIL SPEC 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 1ST MATERIAL RESPONSE OR L-P-513 FED SPEC 2ND MATERIAL RESPONSE OR MIL-P-14078 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR PLASTIC PHENOLIC OR PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
THICKNESS0.057 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5186-TE-199?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5186-TE-199?
5186-TE-199 is a WASHER,FLAT.
What is the NSN for 5186-TE-199?
5186-TE-199 is cataloged in the U.S. Government catalog under NSN 5310-01-429-5569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5186-TE-199

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.