PartsTable
Technical Data Sheet
5182 ✓ Verified by PartsTable
Giochi Preziosi · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Stack 10 wooden cars in this gated parking tower and top them with the sliding counter. Then see the cars drop down and the counter point to a lower number each time a car is removed from the bottom! With its imaginative design details and wonderfully simple mechanics, this clever toy is a captivating, educational way to play with sorting, matching, counting, and more! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-011-0499, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 5182
NSN: 5305-00-011-0499
FSC: 5305
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
length48.000 INCHES MINIMUM AND 60.000 INCHES MAXIMUM IN
hub_typeLUER LOCK
materialRUBBER TIP
tip_typeTAPERED
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
cone_width1.8375 INCHES NOMINAL IN
head_styleSQUARE
design_typeCANE
head_height0.400 INCHES MINIMUM AND 0.444 INCHES MAXIMUM IN
thread_class2A A
bore_diameter3.1875 INCHES NOMINAL IN
coil_quantity11-1/4
NSN5305-00-011-0499
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5182 · Giochi Preziosi ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD QUANTITY PER INCH: 24
THREAD DIRECTION: RIGHT-HAND
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
HEAD STYLE: ROUND
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1S STYLE
THREAD CLASS: 2A A
THREAD LENGTH: 0.375 INCHES MINIMUM IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH24
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
HEAD STYLEROUND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1S STYLE
THREAD CLASS2A A
THREAD LENGTH0.375 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
GGG-P-836 TY1CL1Interchangeable
interchangeable cross-reference
interchangeable
GGG-P-836Interchangeable
interchangeable cross-reference
interchangeable
730-13/16Interchangeable
interchangeable cross-reference
interchangeable
740Interchangeable
interchangeable cross-reference
interchangeable
0043012Interchangeable
interchangeable cross-reference
interchangeable
20-668Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5182?
5182 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Giochi Preziosi. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5182?
There are 23 known substitutes for 5182: GGG-P-836 TY1CL1, GGG-P-836, 730-13/16 and 20 more. Substitute compatibility should be verified for your specific system.
Is 5182 still available?
5182 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5182