PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5180-0065
5180-0065 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, groove_width: 0.062 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.500 INCHES NOMINAL IN, overall_height: 0.281 INCHES NOMINAL IN, groove_outside_diameter: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-330-7222, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5180-0065
NSN: 5325-01-330-7222
FSC: 5325
CAGE: 88898 — THE JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY LLC (USA)
SPECIFICATIONS
materialRUBBER OVERALL
groove_width0.062 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.500 INCHES NOMINAL IN
overall_height0.281 INCHES NOMINAL IN
groove_outside_diameter0.625 INCHES NOMINAL IN
grommet_construction_typeSPLIT
large_flange_outside_diameter0.812 INCHES NOMINAL IN
NSN5325-01-330-7222
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5180-0065 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROOVE WIDTH: 0.062 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
GROMMET STYLE: ROUND
•
LARGE FLANGE OUTSIDE DIAMETER: 0.812 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
GROMMET CONSTRUCTION TYPE: SPLIT
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
GROOVE WIDTH0.062 INCHES NOMINAL IN
OVERALL HEIGHT0.281 INCHES NOMINAL IN
HOLE DIAMETER0.500 INCHES NOMINAL IN
GROMMET STYLEROUND
LARGE FLANGE OUTSIDE DIAMETER0.812 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.625 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESPLIT
MATERIALRUBBER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
B14-4Interchangeable
interchangeable cross-reference
interchangeable
411177-139Interchangeable
interchangeable cross-reference
interchangeable
MS20659-139Interchangeable
interchangeable cross-reference
interchangeable
11304Interchangeable
interchangeable cross-reference
interchangeable
D724Interchangeable
interchangeable cross-reference
interchangeable
B107.8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5180-0065?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5180-0065?
5180-0065 is a GROMMET,NONMETALLIC.
What parts can replace 5180-0065?
There are 16 known substitutes for 5180-0065: B14-4, 411177-139, MS20659-139 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5180-0065?
5180-0065 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-01-330-7222. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5180-0065

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026