The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 1.552 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN, first_leg_length: 0.250 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS W/ TONGUE. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-517-9576, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
5179576
NSN:5340-00-517-9576 FSC:5340 — Hardware, Commercial CAGE:19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
material
COPPER ALLOY 360
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
1.552 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
first_leg_length
0.250 INCHES NOMINAL IN
second_leg_style
CORNER RADIUS W/ TONGUE
second_leg_width
1.552 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
style_designator
ANGLE
second_leg_length
0.875 INCHES NOMINAL IN
surface_treatment
ENAMEL BAKED
first_leg_thickness
0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
second_leg_end_width
0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NSN
5340-00-517-9576
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.196 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.997 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: FED-STD-595 CR X24087 FED STD SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 1.552 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.196 INCHES NOMINAL IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.997 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
FED-STD-595 CR X24087 FED STD SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
1.552 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
SECOND LEG LENGTH
0.875 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE
TWO HOLES
STYLE DESIGNATOR
ANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5179576?
5179576 is a BRACKET,ANGLE.
What is the NSN for 5179576?
5179576 is cataloged in the U.S. Government catalog under NSN 5340-00-517-9576. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.