PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 517830
517830 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ROPE,ASBESTOS is a the manufacturer industrial component. Key specifications include yarn_type: PLAIN, nominal_size: 1/16 IN. DIA IN, braided_jacket: NOT INCLUDED, special_features: 200 FT FT, fabrication_method: TWISTED, cross-sectional_shape: ROUND.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-901-7237, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
517830
NSN: 5330-00-901-7237
FSC: 5330
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
yarn_typePLAIN
nominal_size1/16 IN. DIA IN
braided_jacketNOT INCLUDED
special_features200 FT FT
fabrication_methodTWISTED
cross-sectional_shapeROUND
asbestos_content_percentage95.0 MINIMUM AND 98.0 MAXIMUM
NSN5330-00-901-7237
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 517830 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FABRICATION METHOD: TWISTED
•
NOMINAL SIZE: 1/16 IN. DIA IN
•
BRAIDED JACKET: NOT INCLUDED
•
CROSS-SECTIONAL SHAPE: ROUND
•
YARN TYPE: PLAIN
•
ASBESTOS CONTENT PERCENTAGE: 95.0 MINIMUM AND 98.0 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
FABRICATION METHODTWISTED
NOMINAL SIZE1/16 IN. DIA IN
BRAIDED JACKETNOT INCLUDED
SPECIAL FEATURES200 FT FT
CROSS-SECTIONAL SHAPEROUND
YARN TYPEPLAIN
ASBESTOS CONTENT PERCENTAGE95.0 MINIMUM AND 98.0 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
1375-M975Interchangeable
interchangeable cross-reference
interchangeable
4-8-7Interchangeable
interchangeable cross-reference
interchangeable
1560L19-031Interchangeable
interchangeable cross-reference
interchangeable
4-87-1Interchangeable
interchangeable cross-reference
interchangeable
C10605CInterchangeable
interchangeable cross-reference
interchangeable
025-0487-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 517830?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 517830?
517830 is a ROPE,ASBESTOS.
What parts can replace 517830?
There are 13 known substitutes for 517830: 1375-M975, 4-8-7, 1560L19-031 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 517830?
517830 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-901-7237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 517830

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026