PartsTable
Technical Data Sheet

517507.F96/159 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

517507.F96/159: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.4997 INCHES MINIMUM AND 0.5007 INCHES MAXIMUM IN, overall_width: 0.3106 INCHES MINIMUM AND 0.3122 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: 13BALLS,OPERATING TEMP MINUS 65 DEG F TO PLUS 1000 DEG F,INNER RING THRUST SIDE CLEARLY MARKED DEGF. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-424-1514, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
517507.F96/159
NSN: 3110-01-424-1514
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.4997 INCHES MINIMUM AND 0.5007 INCHES MAXIMUM IN
overall_width0.3106 INCHES MINIMUM AND 0.3122 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_features13BALLS,OPERATING TEMP MINUS 65 DEG F TO PLUS 1000 DEG F,INNER RING THRUST SIDE CLEARLY MARKED DEGF
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyBEARING,BALL
thrust_directional_capability_designationSINGLE
NSN3110-01-424-1514
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 517507.F96/159 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.3106 INCHES MINIMUM AND 0.3122 INCHES MAXIMUM IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.1240 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURES13BALLS,OPERATING TEMP MINUS 65 DEG F TO PLUS 1000 DEG F,INNER RING THRUST SIDE CLEARLY MARKED DEGF
PART NAME ASSIGNED BY CONTROLLING AGENCYBEARING,BALL
BORE DIAMETER0.4997 INCHES MINIMUM AND 0.5007 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
P1-138Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 517507.F96/159?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 517507.F96/159?
517507.F96/159 is a BEARING,BALL,THRUST.
What parts can replace 517507.F96/159?
There is 1 known substitute for 517507.F96/159: P1-138. Substitute compatibility should be verified for your specific system.
What is the NSN for 517507.F96/159?
517507.F96/159 is cataloged in the U.S. Government catalog under NSN 3110-01-424-1514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 517507.F96/159

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.